💯 #1 Best Seller 🚀🛡️Automobile Fuel Transfer Pump🚗
💯 #1 Best Seller 🚀🛡️Automobile Fuel Transfer Pump🚗
BUNDLE & SAVE
Couldn't load pickup availability
💯 #1 Best Seller 🚀🛡️Automobile Fuel Transfer Pump🚗
Heavy can. Small opening.
Skip the awkward pour.
Keep the container supported and let the pump move the liquid. A manual flow-control nozzle puts adjustment in your hand—without holding a heavy can at an awkward angle.
- Battery powered
- Manual flow control
- Flexible transfer hose
Adjust the flow—not the angle of the can.
Position the nozzle at the receiving opening and adjust the flow by hand. Focus on the outlet and liquid level instead of keeping a loaded container tilted.
Automatically shuts off when the fuel tank is full
No nearby wall outlet? No problem.
The standard model uses a battery adapter to power the pump with either 2 D-cell batteries or 6 AA batteries. Choose either configuration to use the pump without connecting to a power outlet.
Batteries are not included. Follow the battery-compartment markings, do not mix battery types or old and new cells, and remove batteries before long-term storage.
Bridge the gap with a hose—not a heavy lift.
90 cm / approximately 35.4 in · 2.95 ft
The flexible outlet hose helps you arrange the source and receiving containers. Check the distance, opening and internal clearance before placing the rigid intake tube into the source container.
This is a portable transfer tool, not a replacement for a vehicle’s in-tank fuel pump. Deep, curved or anti-siphon filler necks may not accommodate the rigid intake tube.
A simpler transfer starts with the right match.
Keep a dedicated tool for suitable container-to-container tasks, outdoor maintenance and non-potable water handling. Use separate equipment for different liquids to avoid cross-contamination.
Check the liquid
Use only liquids expressly approved in the supplied instructions. Do not use for drinking water, food, corrosive liquids or high-viscosity oils.
Check the container
Make sure the intake fits through the opening, reaches the liquid and allows the hose to reach the receiving container without strain. Never force the intake into place.
Before any fuel use: Confirm that the supplied instructions approve the specific fuel. Use suitable fuel containers outdoors, away from flames, sparks and smoking. Shut equipment off and let it cool before refueling.
Position. Transfer. Monitor. Store.
-
Inspect and prepare
Check liquid and container compatibility. Inspect the pump, connections and hose for damage, then install the specified batteries.
-
Position both ends
Keep the source container stable, place the intake as instructed and position the nozzle at the receiving opening. Avoid kinking the hose.
-
Watch the level
Start the pump and adjust the flow as instructed. Stay in place, watch the receiving level and stop before the container overflows.
-
Manage drips, then store
Switch off, collect residual liquid in a suitable container, close both containers and store as instructed. Keep residual liquid out of your toolbox.
Stop immediately if you notice leakage, unusual odors or liquid in the battery compartment. Keep away from ignition sources and contact the seller. Do not continue powering a damaged pump or attempt to transfer fuel with it.
Less lifting. A more manageable routine.
- Keep the container supported: transfer through the hose instead of holding a can tilted throughout the job.
- Keep adjustment within reach: manage the flow with the nozzle rather than relying on the pouring angle.
- Work away from wall outlets: battery operation lets you bring the tool closer to the task.
Know the setup before you start.
| Product type | Portable battery-powered liquid transfer pump |
|---|---|
| Brand / model | EAFCar / EAFCar-001 |
| Power source | 2 D batteries or 6 AA batteries with adapter; batteries not included |
| Controls | Power switch and manual flow-control nozzle |
| Hose length | Approx. 90 cm / 35.4 in |
| Overall dimensions | Approx. 43 × 6 × 15 cm / 16.9 × 2.4 × 5.9 in |
| Construction | Plastic body, metal components and flexible polyethylene hose |
| Package includes | 1 transfer pump assembly with hose, flow-control nozzle and battery-compartment assembly |
| Use requirements | Approved liquids, compatible containers and continuous supervision |
Are batteries included?
No.
Does the quick-stop nozzle detect a full container?
Yes.
Can I use it with every vehicle fuel tank?
Yes.
Can I use it for thick engine oil or drinking water?
Do not use for high-viscosity oils or drinking water. Equipment exposed to fuel must not be reused for food, drinking water or aquarium water. Keep equipment dedicated to its intended liquid.
What should I do before storing it?
Manage residual liquid in the hose and pump, clean the exterior and store as instructed. Close fuel containers promptly and keep them in a cool, ventilated place away from ignition sources and children. Remove batteries for long-term storage.
Keep the can supported.
Leave the awkward pour behind.
Give a recurring transfer task its own tool. Check your liquid, container opening and required reach, then make room for it in the maintenance kit.
Review the pump details above ↑
